2/2 2026
Skive Municipality's CSR Award goes to a company that has demonstrated particular inclusiveness and, through concrete initiatives, is leading the way towards an inclusive job market.
19/12 2025
Skive Municipality's CSR Award goes to a company that has demonstrated particular inclusiveness and, through concrete initiatives, is leading the way towards an inclusive job market.
Hold dig opdateret
Modtag nyheder fra Europas førende producent af prototyper og serier i plast, letmetal og EPS/EPP.
1/12 2025
8/1 2026
We are happy to announce that we will be exhibiting at EUROGUSS in Nuremberg. It is always a pleasure to meet our customers and build new relationships, so we look forward to seeing you at stand 4-170...
25/11 2025
9/12 2025
X Vent switched to injection moulding for faster production and lower part price.
30/9 2025
7/11 2025
We are exhibiting at Elmia Subcontractor and look forward to meeting our customers and building new relations. Come and meet our team at stand B01:29.
28/7 2025
1/10 2025
We are happy to announce that we will be exhibiting at Kunststoffenbeurs in the Netherlands. It is always a pleasure to meet our customers and build new relationships, so we look forward to seeing you...
28/7 2025
1/8 2025
We are excited to announce that we will be exhibiting at the HI Tech & Industry fair in Denmark. It is always a pleasure to meet our customers and build new relationships, so we look forward to se...
22/4 2025
27/6 2025
We have expanded our factory in Skive to house our new electric steam boiler.
14/4 2025
29/4 2025
Due to an increasing demand for EPP parts, we are now adding two new EPP moulding machines to our factory in Skive.
27/2 2025
22/9 2025
A brand-new investment just landed at Idé-Pro – the Bosch Electric Steam Boiler.
12/2 2025
26/11 2025
For 20 weeks we have had the pleasure of Anders' internship in the sales department. Here he has acquired a lot of knowledge about technical sales, quoting and follow-up, as well as product developmen...
10/2 2025
26/11 2025
We are excited to announce that we will once again be exhibiting at Plastteknik Nordic. It's always a pleasure to meet our customers and build new relationships, so we look forward to seeing you at st...
8/1 2025
27/2 2025
Results, current status, initiatives, climate report. We are proud to present our first ESG report.
13/12 2024
7/11 2025
We're happy to annonuce that, we're expanding our machine park with a Makino V90S.
11/12 2024
7/11 2025
We are happy to announce, that we have expanded our plastic production with eight additional fully electronic injection moulding machines.
10/12 2024
Our CEO Morten Nors, wins this year's Regional Theme Award 2024.
16/10 2024
18/11 2025
Etac was looking for a supplier and partner to help make a complicated design producible. It was a handle for their new transfer platform, Molift Transfer Pro, which helps carers transfer patients in ...
2/9 2024
17/10 2024
We are excited to announce that we will once again be exhibiting at Elmia Subcontractor. It's always a pleasure to meet our customers and build new relationships, so we look forward to seeing you at s...
2/9 2024
17/10 2024
We are excited to announce that we will exhibit at the International Suppliers Fair. It's always a pleasure to meet our customers and build new relationships, so we look forward to seeing you at stand...
12/6 2024
23/6 2025
In the Plastic Guide, we prepare you to design plastic parts. We know that it can be a long and challenging process, which is why we hope this guide will help you on your way.
12/6 2024
26/11 2025
It was a pleasure to have our good customer, SKOV A/S, visit us for a theme day focusing on plastics, plastic properties, plastic construction and compounding.
22/4 2024
27/5 2024
We are expanding our plastic production capacity with another injection moulding machine.
14/3 2024
18/11 2025
At Skills Denmark 2024, the Plastics and Tooling Industries want to attract young people with a live demo of injection moulding, that visitors can take part in. At the same time, they would like to gi...
29/11 2023
10/11 2025
We're excited to announce that we will once again be exhibiting at Euroguss. It's always a pleasure to meet our customers and build new relationships, so we look forward to seeing you at stand 8-325 f...
29/11 2023
27/5 2024
We are expanding our machining capacity with two new Makino a40 machining centres.
3/11 2023
27/5 2024
We are excited to announce that we will once again be exhibiting at Elmia Subcontractor. It's always a pleasure to meet our customers and build new relationships, so we look forward to seeing you at s...
9/8 2023
7/11 2025
After choosing Idé-Pro as supplier, Louis Poulsen receives high-pressure die cast (HPDC) parts in the quality and speed they require and avoid tool changes by means of Idé-Pro's simulations.
13/3 2023
26/11 2025
At Idé-Pro, we injection mould plastic parts in a variety of different plastic materials, with different properties. For example, POM has good properties such as low friction and high wear resistance...
17/1 2023
26/11 2025
Louis Poulsen came to Idé-Pro with their OE Quasi project, designed by Olafur Eliasson – a sustainable prestige project that resulted in a showpiece lamp and exhibition for Milan Design Week 2019....
4/1 2023
26/11 2025
At Idé-Pro, we have many years of experience with sustainability and for the past six years we have focused on the energy and climate part of sustainability. For a number of years, we have been mappi...
15/12 2022
26/11 2025
For Dynello ApS, it is extremely important to always have products in stock, and to be able to deliver quickly when they receive larger orders.
8/12 2022
26/11 2025
We are proud to be the manufacturer of the Unmute frames. Unmute is a Danish company, that you might know from the Danish version of Shark Tank.
30/11 2021
26/11 2025
Therefore, we have built a wide network of raw material suppliers with exciting "green" materials on their shelves.
6/11 2021
26/11 2025
We are once again increasing the capacity of our plastic production, this time with three Zeres III Series hybrid injection moulding machines and associated robots
15/9 2021
26/11 2025
With an increasing focus on CO2 emissions and energy consumption, we give customers and decision-makers insight into our efforts.
21/4 2021
27/5 2024
The latest addition to our in-house light metal foundry is this Frech 125T zinc hot chamber machine that can cast items up to 3.4 kg.
6/4 2021
27/5 2024
The 82-tonne Trimill VU4021, which is already in operation, can process complex parts up to 2100 x 4000 x 1200 mm.
17/2 2021
18/11 2025
It is with great pleasure that Idé-Pro can announce that we are manufacturing visible plastic surface parts for the first electric trucks from Scania.
27/1 2021
26/11 2025
On our 4000T injection moulding machine in Denmark, we manufacture Boxwall BW102, a mobile flood barrier measuring 992 x 1199 x 1060 mm and weighing 15.2 kg.
19/10 2020
26/11 2025
Idé-Pro expands capacity in the light metal department with new die-casting and machining machines.
25/6 2020
10/11 2025
Entrepreneur Daniel Hansen had a great idea when he opened cardboard boxes one day and stocked up on goods.
28/5 2020
15/10 2024
Kassow Robots, a manufacturer of 7-axis robots, gained a first-class partner.
20/3 2020
26/11 2025
At the start of the Covid-19 pandemic, we were contacted by the Central Denmark Region.
10/2 2020
26/11 2025
We were contacted by Grundfos as they needed to develop and injection mould a collection box in 100% recycled plastic containing materials from end-of-life Grundfos circulation pumps.
18/1 2020
26/11 2025
In collaboration with the horticultural company Wellfarmed, Idé-Pro has developed technical EPS components for an innovative system that grows vegetables without soil, on a few square metres and with...
10/12 2019
26/11 2025
Etac A/S, one of the world's leading developers of ergonomic aids, produces lifts and slings that can lift the user safely. These lifts and slings needed to be updated with a new metal hook, and we to...
8/11 2018
26/11 2025
Flexibility is crucial for businesses - especially in the start-up phase of a product. Just ask Podbike, a Norwegian manufacturer of electric velomobiles that we helped take from prototype to final pr...
3/5 2012
27/8 2025
Close collaboration between Scania AB and Idé-Pro Skive has resulted in a revolutionary new oil sump. The development of this prototype was a great challenge.